The FRILITE® W-Series cenospheres have an Al2O3 content between 30-40% and Fe2O3 contents of typically lower than 2%, which leads to an outstanding temperature resistance of over 1400°C. They are easily recognized by their white to off-white colour.
The FRILITE® W-Series cenospheres are available in sub grades between 5-500 microns and a bulk density of about 400kg/m³, specific gravity typically reaching from 0,7-0,85g/cm³ and featuring 90% survival rates at >3000 psi.
Applications
- Foundry and refractory
- Paints and coatings
More information
The FRILITE® K-Series cenospheres have an Al2O3 content between 34-39%, which leads to good temperature resistance of 1400°C. They are recognizable by their off-white colour.
The FRILITE® K-Series cenospheres are available in sub grades between 5-500 microns and a bulk density of about 400kg/m³, specific gravity typically reaching from 0,7-0,85g/cm³ and featuring up to 90% survival rates at >3000 psi.
Applications
- Foundry and refractory
- Caulks, sealants, putties and adhesives
- Concrete
- Wet ready-mix products
More information
The FRILITE® E-Series cenospheres have an Al2O3 content between 34-39% and Fe2O3 contents of typically lower than 2%, which leads to an outstanding temperature resistance of over 1400°C. They can be easily recognized by their white to off-white colour.
The FRILITE® E-Series cenospheres are available in sub grades between 5-600 microns and a bulk density of about 400kg/m³, specific gravity typically reaching from 0,7-0,85g/cm³ and featuring 90% survival rates at >3000 psi.
Applications
- Foundry and refractory
- Caulks, sealants, putties and adhesives
Standard Grades
More information
The FRILITE® G-Series cenospheres have an Al2O3 content between 26-32%, which leads to good temperature resistance of over 1150°C. They are recognizable by their off-white to grey colour.
The FRILITE® G-Series cenospheres are available in sub grades between 5-500 microns and a bulk density of about 400kg/m³, specific gravity typically reaching from 0,7-0,85g/cm³ and featuring up to 90% survival rates at >3000 psi.
Applications
- Foundry and refractory
- Caulks, sealants, putties and adhesives
More information
The FRILITE® P-Series are tiny hollow spheres made from natural occurring sand. The special production process does not use any fossil fuels and is simply based on a physical shape change, without the involvement of any chemicals, resulting in an environmentally neutral product.
The FRILITE® P-Series spheres are available in sub grades between 75-800 microns and bulk densities reaching from 80-600kg/m³.
Applications
- Plaster and dry mortar
- Lightweight concrete
- Lightweight panels
- Insulation coatings
- Sound dampening systems
More information
